To Next PageTo Next Page
Need help?Do you have a question about the Arcam A49 and is the answer not in the manual?
General| Amplifier class | G |
|---|---|
| Frequency range | 20 - 20000 Hz |
| Audio output channels | - channels |
| Peak power per channel | - W |
| Signal-to-Noise Ratio (SNR) | 110 dB |
| Total Harmonic Distortion (THD) | 0.2 % |
| RMS power output per channel (4 Ohm) | 400 W |
| RMS power output per channel (8 Ohm) | 200 W |
| Bridge-mode power output per channel (4 Ohm) | 1100 W |
| Speakers connectivity type | - |
| Product color | Black |
| Connectivity technology | Wired |
| Power consumption (standby) | 0.5 W |
| Package weight | 21400 g |
Weight and Dimensions| Depth | 425 mm |
|---|---|
| Width | 433 mm |
| Height | 171 mm |
| Weight | 19700 g |
Essential safety precautions for operating the apparatus.
Details regarding compliance with electrical safety standards and regulations.
Congratulates the user and introduces the Arcam FMJ range.
Recommendations for optimal placement of the amplifier for performance and ventilation.
Instructions for connecting the apparatus to the mains power supply.
Advice on selecting and routing audio cables for optimal system performance.
Details on line-level, phono, and balanced XLR audio inputs and outputs.
Information on power inlet, voltage select, speaker terminals, trigger out, accessory power, headphones, and earth terminal.
Details on line-level, phono, and balanced XLR audio inputs and outputs.
Information on power inlet, voltage select, trigger out, accessory power, headphones, and earth terminal.
Covers unbalanced and balanced pre-amplifier inputs and the pre-amplifier output.
Information on power inlet, voltage select, input switches, speaker terminals, and trigger input/output.
Covers unbalanced and balanced pre-amplifier inputs and the pre-amplifier output.
Information on power inlet, voltage select, input switches, speaker terminals, and trigger input/output.
Covers powering on, display control, selecting sources, and using audio inputs.
Details phono input settings, balanced connections, processor mode, and bi-amplification.
Explains recording, balance adjustment, speaker control, volume, headphones, and muting.
Instructions for powering the unit on and using the SP1/SP2 speaker selection buttons.
Details on using the remote control, including battery installation and code configuration.
Details on using the remote for AMP, TUN, CD, and BD device modes.
Important safety and connection advice for loudspeakers.
Instructions for normal single wiring and bi-wiring speaker configurations.
How to connect the A49 with a power amplifier for bi-amping speakers.
Setting up the P49 power amplifier in bridged mode for increased power.
Configuring two P49 amplifiers for dual mono operation, including connection diagrams.
Addresses no sound, sound cut-outs, and remote control non-responsiveness.
Specs for power output, distortion, input sensitivity, impedance, and frequency response.
Details on outputs, general data (dimensions, weight), and supplied accessories.
Specs for inputs, outputs, general data (dimensions, weight), and supplied accessories.
Details on power output, distortion, input sensitivity, impedance, and frequency response.
Information on general technical data, dimensions, weight, and supplied accessories.
Details on power output, distortion, input sensitivity, impedance, and frequency response.
Information on general technical data, dimensions, weight, and supplied accessories.
Details on the warranty period, coverage, and claim procedures.
Information on seeking help for issues and registering the product online.
Guidance on environmentally responsible disposal of the product.
