Arcam A49 User Manual

E-21E-20
English
Continuous power output (20Hz—20kHz at 0.2% THD), per channel
Both channels, 8Ω, 20Hz—20kHz 200W
Single channel, 4Ω, at 1kHz 400W
Harmonic distortion, 80% power, 8Ω at 1kHz 0.001%
Inputs
Phono (MM) cartridge:
Input sensitivity at 1kHz 5mV
Input impedance 47kΩ + 100pF
Frequency response (ref. RIAA curve) 20Hz—20kHz ± 1dB
Signal/noise ratio (Awtd) 50W, ref. 5mV input 80dB
Overload margin, 5mV at 1kHz 20dB
Inputs: RCA type XLR type
Nominal sensitivity 1V 2V
Input impedance 10kΩ 10kΩ
Maximum input 8V 15V
Frequency response 20Hz—20kHz ± 0.05dB
Signal/noise ratio (Awtd) 50W, ref. 1V/2V input 105dB
Preamplier output RCA type XLR type
Nominal output level 1.15V 2.3V
Output impedance 47Ω 200Ω
Headphones output
Maximum output level into 600Ω 4Vrms
Output impedance 1Ω
Load range 16Ω—2kΩ
Accessory power output
Two accessory power cables supplied, provides two
2.1mm DC connectors
6V, 1A
12V, 1.5A
General
Mains voltage 110–120V~ or 220–240V~
Power consumption (maximum) 1kW
Dimensions W x D x H (including feet) 433 x 425 x 171mm
Weight (net) 19.7kg
Weight (packed) 21.4kg
Supplied accessories Mains lead
CR902 remote control
2 x AAA batteries
Accessory power cable
E&OE
NOTE: All specication values are typical unless otherwise stated.
A49
specications
Continual improvement policy
Arcam has a policy of continual improvement for its
products. is means that designs and specications
are subject to change without notice.
Inputs
Phono (MM) cartridge:
Input sensitivity at 1kHz 5mV
Input impedance 47kΩ + 100pF
Frequency response (ref. RIAA curve) 20Hz—20kHz ± 1dB
Signal/noise ratio (Awtd) 50W, ref. 5mV input 80dB
Overload margin, 5mV at 1kHz 20dB
Inputs: RCA type XLR type
Nominal sensitivity 1V 2V
Input impedance 10kΩ 10kΩ
Maximum input 4.6V 8.2V
Frequency response 20Hz—20kHz ± 0.05dB
Signal/noise ratio (Awtd) 50W, ref. 1V input 105dB
Preamplier output RCA type XLR type
Nominal output level 1.15V 2.3V
Output impedance 47Ω 200Ω
Headphones output
Maximum output level into 600Ω 4Vrms
Output impedance 1Ω
Load range 16Ω—2kΩ
Accessory power output
Two accessory power cables supplied, provides two
2.1mm DC connectors
6V, 1A
12V, 1.5A
General
Mains voltage 110–120V~ or 220–240V~
Power consumption (maximum) 300W
Dimensions W x D x H (including feet) 433 x 410 x 171mm
Weight (net) 8.7kg
Weight (packed) 10.4kg
Supplied accessories Mains lead
CR902 remote control
2 x AAA batteries
Accessory power cable
E&OE
NOTE: All specication values are typical unless otherwise stated.
C49
specications
Continual improvement policy
Arcam has a policy of continual improvement for its
products. is means that designs and specications
are subject to change without notice.

Arcam A49 Specifications

General

Amplifier class	G
Frequency range	20 - 20000 Hz
Audio output channels	- channels
Peak power per channel	- W
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.2 %
RMS power output per channel (4 Ohm)	400 W
RMS power output per channel (8 Ohm)	200 W
Bridge-mode power output per channel (4 Ohm)	1100 W
Speakers connectivity type	-
Product color	Black
Connectivity technology	Wired
Power consumption (standby)	0.5 W
Package weight	21400 g

Weight and Dimensions

Depth	425 mm
Width	433 mm
Height	171 mm
Weight	19700 g