Arcam A49 - P49 Technical Specifications; Power, Distortion, and Input Specs; General Technical Data and Accessories; P349 Technical Specifications

E-23E-22
English
Continuous power output (20Hz—20kHz at 0.2% THD), per channel
Both channels, 8Ω, 20Hz—20kHz 200W
Single channel, 4Ω, at 1kHz 400W
Harmonic distortion, 80% power, 8Ω at 1kHz 0.001%
Inputs
PWR IN input: RCA type XLR type
Nominal sensitivity for 200W / 8Ω 1.15V 2.3V
Input impedance 10kΩ 10kΩ
Frequency response 20Hz—20kHz ± 0.05dB
Signal/noise ratio (Awtd) ref 50W / 8Ω 110dB
General
Mains voltage 110–120V~ or 220–240V~
Power consumption (maximum) 1kW
Dimensions W x D x H (including feet) 433 x 425 x 171mm
Weight (net) 18.0kg
Weight (packed) 19.7kg
Supplied accessories Mains lead
E&OE
NOTE: All specication values are typical unless otherwise stated.
P49
specications
Continual improvement policy
Arcam has a policy of continual improvement for its
products. is means that designs and specications
are subject to change without notice.
Continuous power output (20Hz—20kHz at 0.2% THD), per channel
ree channels, 8Ω, 20Hz—20kHz 180W
Two channels, 8Ω, 20Hz—20kHz 200W
Single channel, 8Ω, at 1kHz 220W
Single channel, 4Ω, at 1kHz 400W
Harmonic distortion, 80% power, 8Ω at 1kHz 0.001%
Inputs
PWR IN input: RCA type XLR type
Nominal sensitivity for 200W / 8Ω 1.15V 2.3V
Input impedance 10kΩ 10kΩ
Frequency response 20Hz—20kHz ± 0.05dB
Signal/noise ratio (Awtd) ref 50W / 8Ω 110dB
General
Mains voltage 110–120V~ or 220–240V~
Power consumption (maximum) 1kW
Dimensions W x D x H (including feet) 433 x 425 x 171mm
Weight (net) 18.0kg
Weight (packed) 19.7kg
Supplied accessories Mains lead
E&OE
NOTE: All specication values are typical unless otherwise stated.
P349
specications
Continual improvement policy
Arcam has a policy of continual improvement for its
products. is means that designs and specications
are subject to change without notice.