Arcam A19 User Manual

E-3
English
welcome…
ank you and congratulations for purchasing your Arcam FMJ Amplier.
Arcam has been producing specialist audio products of remarkable quality for over three
decades and the new A19 amplier is the latest in a long line of award winning HiFi. e design
of the FMJ range draws upon all of Arcam’s experience as one of the UK’s most respected audio
companies, to produce Arcam’s best performing range of stereo ampliers yet – designed and
built to give you years of listening enjoyment.
is handbook is a guide to installing and using the A19 Integrated Amplier, including
information on the more advanced features. Use the contents list shown on this page to guide
you to the section of interest.
We hope that your FMJ amplier will give you years of trouble-free operation. In the unlikely
event of any fault, or if you simply require further information about Arcam products, our
network of dealers will be happy to help you. Further information can also be found on the
Arcam website at www.arcam.co.uk.
e FMJ development team
Contents
safety guidelines .......................................E-2
Important safety instructions .............................E-2
Safety compliance...................................................E-2
welcome… .................................................E-3
overview
.....................................................E-4
Placing the unit .......................................................E-5
Power ...........................................................................E-5
Interconnect cables ................................................ E-5
A19 connections .......................................E-6
Audio inputs ..............................................................E-7
Phono input ...............................................................E-7
Record output...........................................................E-7
Pre-amplier output ..............................................E-7
remote control ...........................................E-8
The CR108 remote control...................................E-8
Amplier commands .............................................E-8
loudspeakers .............................................E-9
Single wiring .............................................................E-9
Bi-amping ................................................................... E-9
operation ................................................. E-10
Switching on .......................................................... E-10
Selecting an audio source ................................ E-10
Listening .................................................................. E-10
Adjusting the balance ........................................ E-11
Recording an audio source ..............................E-11
Troubleshooting ................................................... E-11
specications .......................................... E-12
product guarantee
................................ E-13

Arcam A19 Specifications

General

Output level	630 mV
Amplifier class	-
Frequency range	20 - 20000 Hz
RMS rated power	350 W
Output impedance	230 Ω
Input sensitivity	5 mV
Audio output channels	- channels
Peak power per channel	90 W
Signal-to-Noise Ratio (SNR)	80 dB
Total Harmonic Distortion (THD)	0.003 %
RMS power output per channel (8 Ohm)	50 W
Package weight	10200 g
Audio (L/R) out	7
Headphone outputs	1
Headphone connectivity	3.5 mm
Speakers connectivity type	Clamp terminals
Purpose	Home
Product color	Black
Connectivity technology	Wired
AC input voltage	110-240 V

Weight and Dimensions

Depth	275 mm
Width	432 mm
Height	85 mm
Weight	8500 g