Need help?Do you have a question about the Arcam P7 and is the answer not in the manual?
General| Amplifier class | - |
|---|---|
| Frequency range | 1 - 100000 Hz |
| RMS rated power | 1050 W |
| Output impedance | 0.05 Ω |
| Audio output channels | - channels |
| Peak power per channel | 150 W |
| Signal-to-Noise Ratio (SNR) | 122 dB |
| Total Harmonic Distortion (THD) | 0.05 % |
| Purpose | Home |
| On/off switch | Yes |
| Product color | Silver |
| Connectivity technology | Wired |
| Built-in display | No |
| AC input voltage | 115-230 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 3000 W |
Weight and Dimensions| Depth | 450 mm |
|---|---|
| Width | 430 mm |
| Height | 180 mm |
| Weight | 31000 g |
Detailed safety precautions, including electrical safety, ventilation, and handling.
Overview of the P7 Multichannel Power Amplifier, its capabilities, and design.
Guidance on arranging and positioning speakers for optimal surround sound.
Recommendations for high-quality screened cables and proper routing.
Instructions for placing the amplifier, ensuring adequate ventilation and support.
Details on connecting audio inputs from a pre-amplifier, including analogue and trigger inputs.
Instructions for connecting speakers, maintaining polarity, and bi-wiring/bi-amping.
Guidance on checking the plug, mains lead, and plugging into the power supply.
Description of the single control button and power/status LEDs on the front panel.
Steps for switching the amplifier on and off, including soft start and shutdown sequence.
Important warnings and checks before making connections to the amplifier.
Explanation and steps for bi-wiring to improve sound quality by separating signal currents.
Instructions for bi-amping to enhance performance with separate amplification for driver units.
Checks to perform when the unit does not power on or show any lights.
Steps to diagnose and resolve issues when no audio output is heard.
Troubleshooting tips for poor audio quality and distortion.
Diagnosing problems where audio is not outputting to all connected speakers.
Identifying and resolving causes of hum or noise in the audio output.
Troubleshooting electromagnetic interference issues affecting audio or broadcast reception.
Details of the warranty coverage, duration, and terms for repairs.
Procedure for making a warranty claim and returning the unit for service.
Information on how to register the product online for warranty and support.
To Next Page
