EasyManua.ls Logo

arcelik 6220 T - How to Cancel the Washing Programme; Salt Indicator; Rinse Aid Indicator; End of Programme

arcelik 6220 T
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40 Dishwasher / User’s Manual/48 EN
Operating the product


To cancel a programme while the
machine is operating:
Press start/stop key for 3 seconds.
The machine will drain the water inside
the machine for 45 seconds. The
programme is cancelled when washing
light goes off. Then, you can choose
and start a new programme.
C
There might be residues of
detergent or rinse aid left
in the machine and / or on
the pieces being washed
depending on the step
the programme you have
cancelled was in.

Allows to obtain a better drying
performance from the multi-purpose
detergents called as all in one
detergents such as 2in1, 3in1, 4in1,
5in1 and etc., depending on the
hardness level of the tap water.
C
If you have used the Tablet
features during the last
washing programme you
used, Tablet function will
remain active in the next
washing programme you
will select. If you do not
want to use these functions
in the new program you
have selected, press the
Tablet Detergent key until
the indicator of the relevant
function turns off.
C
Tablet Detergent function
may cause change in the
programme duration.

Please check the Salt Indicator on the
panel to see whether there is adequate
amount of softening salt in the
dishwasher or not. You need to refill
the salt reservoir with salt whenever
salt warning indicator appears on the
panel of your machine.

Please check the Rinse Aid Indicator
on the panel to see whether there is
adequate amount of rinse aid in the
dishwasher or not. You need to refill
the rinse aid reservoir with rinse aid
whenever rinse aid warning indicator
appears on the panel of your machine.

When the programme you have
selected comes to an end, the End
progress indicator light will lights up.
1. Open the door of the dishwasher.
2. Turn off your machine.
3. Close the tap.
4. Unplug the machine from the
socket.
A
Leave your dishes in the
machine for about 15
minutes after they are
washed in order to have
them cooled down. Your
dishes will dry in a shorter
time if you leave the door of
your machine ajar during this
period. This will increase the
drying effectiveness of your
machine.

Table of Contents