16 Dishwasher / User’s Manual/43 EN
Preparation
4. If there are stains on tableware
items after washing, level must
be increased and if there is a blue
trace after wiping them by hand, it
must be decreased. This is set to
position 3 as factory default.
C
The rinse aid adjustment is
described under "Adjusting
the amount of rinse aid" in
the section for operating the
machine.
C
Wipe clean any spilled
rinse aid outside the
reservoir. Rinse aid that
spilled accidentally will
cause foaming and it will
eventually decrease washing
performance.
1. When the product is off, press
Time Delay and On/Off keys
simultaneously.
2. Press and hold it until the End
indicator starts flashing.
3. Set to the appropriate level with
the Time Delay key.
4. Press Programme Start/Pause/
Cancel key to store.
5. Press the On/Off key to exit the
setting.
If the 9-hour time delay indicator is on,
no rinse air is dispensed in the washing
programme.
If the 6-hour time delay indicator is on,
1 dose of rinse aid is dispensed.
If the 3-hour time delay indicator is on,
2 doses of rinse aid is dispensed.
If the washing indicator is on, 3 doses
of rinse aid is dispensed.
If the drying indicator is on, 4 doses of
rinse aid is dispensed.
To Next Page
Loading...
