Setting Onzen Cycle Start Time
The display will show oSxx, “xx” representing the starting hour of
the cycle. Use the arrow keys to adjust the hours. Use the Light
key to jump to the next parameter, lter duration (Fd).
Setting Onzen Cycle Duration
The display will show odxx, “xx” representing the duration in hours
of the lter cycle. Use the arrow keys to adjust the duration. Use
the Light key to jump to the next parameter, lter or purge fre-
quency (FF).
• 0 = no ltration (It is not recommended to set this to “0”)
• 24 = continuous ltration
Setting Onzen Cycle Frequency
The display will show oFxx, “xx” representing the number of cycles
per day. Use the arrow keys to adjust the frequency. Use the Light
key to jump to the next parameter, economy mode (EP).
Setting Economy Mode*
This mode allows you to lower the temperature set point of the spa
by 20 °F (11 °C) during a certain period of the day. The display will
show EPx, “x” representing the state of the programmed economy
(0 = disabled, 1 = enabled). Use the arrow keys to enable or dis-
able economy mode. Use the Light key to jump to the next param-
eter, economy start time (ES). When the Economy mode is ON,
the display will toggle between the “Eco” message, the time, and
the water temperature.
Filtration Settings
Owners Manual - Core Series
6565
To Next Page
Loading...
Need help?
General
