Hr
An international error has been
detected in in.xe. Contact dealer
or service supplier.
HL
The system has shut the heater
down because the temperature
at the heater has reached 119ºF
(48ºC). Do not enter the water!
Remove the spa cover and allow
the water to cool down, then the
shut power o and power your
spa up again to reset the system.
AOH
The temperature inside the spa
skirt is too high, causing the in-
ternal temperature in the in.xe to
increase above the normal lim-
its. Open skirt and wait until error
clears.
FLO
The system does not detect any
water ow while the primary
pump is running. Check and
open water valves. Check for
water level. Clean lter. If the
problem persists, call your deal-
er or service supplier.
Prr
A problem is detected with the
temperature probe. Call your
dealer or service supplier.
OH
The water temperature in the spa
has reached 108ºF (42ºC). Do
not enter the water! Remove the
spa cover and allow the water to
cool down to alower tempera-
ture. Call your dealer or service
supplier if the problem persists.
Error Codes
Owners Manual - Core Series
6767
To Next Page
Loading...
Need help?
General
