Arctic APL71012BDW0 - Washing Performance and Noise Problems

Washing Machine / User’s Manual
49 / EN
Problem Reason Soluton
Programme time does not
countdown. (On models with
display) (*)
Timer may stop during water intake. • Tmer ndcator wll not countdown untl the
machne takes n adequate amount of water.
The machne wll wat untl there s suffcent
amount of water to avod poor washng
results due to lack of water. Tmer ndcator
wll resume countdown after ths.
Timer may stop during heating step. • Tmer ndcator wll not countdown untl the
machne reaches the selected temperature.
Timer may stop during spinning step. • Automatc unbalanced load detecton system
mght be actvated due to the unbalanced
dstrbuton of the laundry n the drum.
Programme time does not
countdown. (*)
There might be unbalanced load in the machine. • Automatc unbalanced load detecton system
mght be actvated due to the unbalanced
dstrbuton of the laundry n the drum.
Machine does not switch to
spinning step. (*)
There might be unbalanced load in the machine. • Automatc unbalanced load detecton system
mght be actvated due to the unbalanced
dstrbuton of the laundry n the drum.
The machine will not spin if water is not drained
completely.
• Check the flter and the dranng hose.
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
• Use recommended amount of detergent.
Washing performance is poor:
Laundry turns gray. (**)
Insufficient amount of detergent has been used
over a long period of time.
• Use the recommended amount of detergent
approprate for water hardness and the laundry.
Washing was made at low temperatures for a
long time.
• Select the proper temperature for the
laundry to be washed.
Insufficient amount of detergent is used with
hard water.
• Usng nsuffcent amount of detergent wth
hard water causes the sol to stck on the cloth
and ths turns the cloth nto gray n tme. It s
dffcult to elmnate grayng once t happens.
Use the recommended amount of detergent
approprate for water hardness and the laundry.
Too much detergent is used. • Use the recommended amount of detergent
approprate for water hardness and the laundry.
Washing performance is poor:
Stains persist or the laundry is
not whitened. (**)
Insufficient amount of detergent is used. • Use the recommended amount of detergent
approprate for water hardness and the laundry.
Excessive laundry was loaded in. • Do not load the machne n excess. Load wth
amounts recommended n the "Programme
and consumpton table".
Wrong programme and temperature were
selected.
• Select the proper programme and
temperature for the laundry to be washed.
Wrong type of detergent is used. • Use orgnal detergent approprate for the
machne.
Too much detergent is used. • Put the detergent n the correct
compartment. Do not mx the bleachng
agent and the detergent wth each other.
Washing performance is poor: Oily
stains appeared on the laundry. (**)
Regular drum cleaning is not applied. • Clean the drum regularly. For ths, please
see 4.4.2.
Washing performance is poor:
Clothes smell unpleasantly. (**)
Odours and bacteria layers are formed on the
drum as a result of continuous washing at lower
temperatures and/or in short programmes.
• Leave the detergent drawer as well as the
loadng door of the machne ajar after each
washng. Thus, a humd envronment favorable
for bactera cannot occur n the machne.
Colour of the clothes faded. (**) Excessive laundry was loaded in. • Do not load the machne n excess.
Detergent in use is damp. • Keep detergents closed n an envronment
free of humdty and do not expose them to
excessve temperatures.
A higher temperature is selected. • Select the proper programme and
temperature accordng to the type and
solng degree of the laundry.