Arctic APL71012BDW0 - Specific Operational Errors

50 / EN
Washing Machine / User’s Manual
Problem Reason Soluton
It does not rinse well. The amount, brand and storage conditions of the
detergent used are inappropriate.
• Use a detergent approprate for the washng
machne and your laundry. Keep detergents
closed n an envronment free of humdty and
do not expose them to excessve temperatures.
Detergent is put in the wrong compartment. • If detergent s put n the prewash
compartment although prewash cycle s not
selected, machne can take ths detergent
durng rnsng or softener step. Put the
detergent n the correct compartment.
Pump filter is clogged. • Check the flter.
Drain hose is folded. • Check the dran hose.
Laundry became stiff after
washing. (**)
Insufficient amount of detergent is used. • Usng nsuffcent amount of detergent for
the water hardness can cause the laundry to
become stff n tme. Use approprate amount
of detergent accordng to the water hardness.
Detergent is put in the wrong compartment. • If detergent s put n the prewash
compartment although prewash cycle s not
selected, machne can take ths detergent
durng rnsng or softener step. Put the
detergent n the correct compartment.
Detergent might be mixed with the softener. • Do not mx the softener wth detergent.
Wash and clean the dspenser wth hot water.
Laundry does not smell like the
softener. (**)
Detergent is put in the wrong compartment. • If detergent s put n the prewash
compartment although prewash cycle s not
selected, machne can take ths detergent
durng rnsng or softener step. Wash and
clean the dspenser wth hot water. Put the
detergent n the correct compartment.
Detergent might be mixed with the softener. • Do not mx the softener wth detergent.
Wash and clean the dspenser wth hot water.
Detergent residue in the
detergent drawer. (**)
Detergent is put in wet drawer. • Dry the detergent drawer before puttng n
detergent.
Detergent has gotten damp. • Keep detergents closed n an envronment
free of humdty and do not expose them to
excessve temperatures.
Water pressure is low. • Check the water pressure.
The detergent in the main wash compartment got
wet while taking in the prewash water. Holes of
the detergent compartment are blocked.
• Check the holes and clean f they are clogged.
There is a problem with the detergent drawer valves. • Call the Authorsed Servce Agent.
Detergent might be mixed with the softener. • Do not mx the softener wth detergent.
Wash and clean the dspenser wth hot water.
Regular drum cleaning is not applied. • Clean the drum regularly. For ths, please
see 4.4.2.
Too much foam forms in the
machine. (**)
Improper detergents for the washing machine are
being used.
• Use detergents approprate for the washng
machne.
Excessive amount of detergent is used. • Use only suffcent amount of detergent.
Detergent was stored under improper conditions. • Store detergent n a closed and dry locaton.
Do not store n excessvely hot places.
Some meshed laundry such as tulle may foam too
much because of their texture.
• Use smaller amounts of detergent for ths
type of tem.
Detergent is put in the wrong compartment. • Put the detergent n the correct
compartment.
Softener is being taken early. • There may be problem n the valves or n the
detergent dspenser. Call the Authorsed
Servce Agent.