BXT3-V2.3
ARCURE SA – 14, rue Scandicci – 93500 Pantin – France - Tel.: +33 144 068 190
www.arcure.net
09/05/2019 5/41
Most collisions between industrial vehicles and
pedestrians occur when setting off or after a
sudden change of direction.
BLAXTAIR® is optimized to provide pertinent
information to the driver during these critical phases.
When the vehicle is operational, it is the driver’s responsibility
to adapt the speed to the environment and remain observant
at all times.
BLAXTAIR® is not designed to detect pedestrians when the
vehicle is travelling at high speeds.
Each year plant accidents result in the loss of life, significant
personal injuries and damages to products and property. Most
plant accidents are the result of driver error.
Basic operator training should be carried out
prior to operators using any equipment
installed with BLAXTAIR® systems. Followed
by periodic training to ensure awareness of
usage and limits.
Optimal performance of a BLAXTAIR® systems is subject to
the compliance with recommendations for use and
maintenance as described in this manual.
BLAXTAIR® shall not be interfaced with the
command or control devices of machinery.
Output signals of BLAXTAIR® shall not be
used for controlling automatically, directly or
indirectly, machinery control devices.
To Next Page
Loading...
