Arduino Due - Spi; Digital Pins D22 - D53 LHS

Arduino® Due
11 / 27 Arduino® Due Modified: 14/06/2024
6.2.3 SPI
The board provides an SPI interface and full access to its pinout as it can be seen in the following table.
Pin Function Type Description
1 CIPO Internal Controller In Peripheral Out
2 +5V Internal Power Supply of 5V
3 SCK Internal Serial Clock
4 COPI Internal Controller Out Peripheral In
5 RESET Internal Reset
6 GND Internal Ground
SPI pinout
6.2.4 Digital Pins D22 - D53 LHS
Pin Function Type Description
1 +5V Power +5V Power Rail
2 D22 Digital GPIO 22
3 D24 Digital GPIO 24
4 D26 Digital GPIO 26
5 D28 Digital GPIO 28
6 D30 Digital GPIO 30
7 D32 Digital GPIO 32
8 D34 Digital GPIO 34
9 D36 Digital GPIO 36
10 D38 Digital GPIO 38
11 D40 Digital GPIO 40
12 D42 Digital GPIO 42
13 D44 Digital GPIO 44
14 D46 Digital GPIO 46
15 D48 Digital GPIO 48
16 D50 Digital GPIO 50
17 D52 Digital GPIO 52
18 GND Power Ground
D22 - D53 LHS pinout