Arduino MKR Vidor 4000 - User Manual

Arduino® MKR Vidor 4000
1 / 15 Arduino® MKR Vidor 4000 Modified: 22/11/2023
Product Reference Manual
SKU: ABX00022
Description
The Arduino MKR Vidor 4000 (from now on referred to as MKR Vidor 4000) is without a doubt the most advanced
and featured-packed board in the MKR family and the only one with a FPGA chip on board. With a camera & HDMI
connector, a Wi-Fi® / Bluetooth® module and up to 25 configurable pins, the board offers a huge range of
possibilities to implement solutions in different environments and applications.
Target Areas
FPGA, IoT, automation, industry, smart cities, signal processing

Arduino MKR Vidor 4000 Specifications

General

Microcontroller	SAM D21 Cortex-M0+ 32bit Low Power ARM MCU
Operating Voltage	3.3V
PWM Pins	12
Flash Memory	256 KB
SRAM	32 KB
Clock Speed	48 MHz
UART	1
SPI	1
I2C	1
DC Current per I/O Pin	7 mA
Input Voltage (recommended)	5V
Weight	32 g
Analog Output Pins	1
EEPROM	No
WiFi	Yes
Analog Input Pins	7

Summary

Features

Microcontroller Block

Details the SAMD21 Arm Cortex-M0+ microcontroller and its specifications.

FPGA Block

Describes the Intel Cyclone 10CL016 FPGA, its logic elements, RAM, and multipliers.

Wireless Communication

Covers the NINA-W102 module for Wi-Fi and Bluetooth connectivity.

Security Features

Details the ECC508 crypto chip for secure boot and PKI algorithms.

Functional Overview

Pinout

Details the basic pinout of the MKR Vidor 4000 board.

Block Diagram

Presents the high-level architecture of the MKR Vidor 4000.

Power Supply

Device Operation

Getting Started - IDE

Getting Started - FPGA Synthesis

Getting Started - Web Editor

FCC Caution

RF Radiation Exposure Statement