Need help?Do you have a question about the Arduino MKR Vidor 4000 and is the answer not in the manual?
General| Microcontroller | SAM D21 Cortex-M0+ 32bit Low Power ARM MCU |
|---|---|
| Operating Voltage | 3.3V |
| PWM Pins | 12 |
| Flash Memory | 256 KB |
| SRAM | 32 KB |
| Clock Speed | 48 MHz |
| UART | 1 |
| SPI | 1 |
| I2C | 1 |
| DC Current per I/O Pin | 7 mA |
| Input Voltage (recommended) | 5V |
| Weight | 32 g |
| Analog Output Pins | 1 |
| EEPROM | No |
| WiFi | Yes |
| Analog Input Pins | 7 |
Details the SAMD21 Arm Cortex-M0+ microcontroller and its specifications.
Describes the Intel Cyclone 10CL016 FPGA, its logic elements, RAM, and multipliers.
Covers the NINA-W102 module for Wi-Fi and Bluetooth connectivity.
Details the ECC508 crypto chip for secure boot and PKI algorithms.
Details the basic pinout of the MKR Vidor 4000 board.
Presents the high-level architecture of the MKR Vidor 4000.
To Next Page
