Arduino Due - Full Pinout Table; Boards 24-Pin Header

Arduino® Due
9 / 27 Arduino® Due Modified: 14/06/2024
6.2 Full Pinout Table
The full pinout of the Arduino Due is available in the following tables.
6.2.1 Board's 24-Pin Header
Pin Function Type Description
1 NC NC Not Connected
2 IOREF IOREF Reference for digital logic voltage - connected to 3.3 V
3 Reset Reset Reset
4 +3V3 Power +3V3 Power Rail
5 +5V Power +5V Power Rail
6 GND Power Ground
7 GND Power Ground
8 VIN Power Voltage Input
9 A0 Analog Analog input 0 / GPIO
10 A1 Analog Analog input 1 / GPIO
11 A2 Analog Analog input 2 / GPIO
12 A3 Analog Analog input 3 / GPIO
13 A4 Analog Analog input 4 / GPIO
14 A5 Analog Analog input 5 / GPIO
15 A6 Analog Analog input 6 / GPIO
16 A7 Analog Analog input 7 / GPIO
17 A8 Analog Analog input 8 / GPIO
18 A9 Analog Analog input 9 / GPIO
19 A10 Analog Analog input 10 / GPIO
20 A11 Analog Analog input 11 / GPIO
21 DAC0 Analog Digital to Analog Converter 0
22 DAC1 Analog Digital to Analog Converter 1
23 CANRX Digital CAN Bus Receiver
24 CANTX Digital CAN Bus Transmitter
Board's 24-Pin Header pinout