EasyManuals Logo

Arduino MEGA 2560 User Manual

Arduino MEGA 2560
8 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
1. Warranties
1.1 The producer warrants that its products will conform to the Specifications. This warranty lasts for one (1) years from the date of the sale. The
producer shall not be liable for any defects that are caused by neglect, misuse or mistreatment by the Customer, including improper installation or testing,
or for any products that have been altered or modified in any way by a Customer. Moreover, The producer shall not be liable for any defects that result from
Customer's design, specifications or instructions for such products. Testing and other quality control techniques are used to the extent the producer deems
necessary.
1.2 If any products fail to conform to the warranty set forth above, the producer's sole liability shall be to replace such products. The producer's liability
shall be limited to products that are determined by the producer not to conform to such warranty. If the producer elects to replace such products, the
producer shall have a reasonable time to replacements. Replaced products shall be warranted for a new full warranty period.
1.3 EXCEPT AS SET FORTH ABOVE, PRODUCTS ARE PROVIDED "AS IS" AND "WITH ALL FAULTS." THE PRODUCER DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, REGARDING PRODUCTS, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
1.4 Customer agrees that prior to using any systems that include the producer products, Customer will test such systems and the functionality of the
products as used in such systems. The producer may provide technical, applications or design advice, quality characterization, reliability data or other
services. Customer acknowledges and agrees that providing these services shall not expand or otherwise alter the producer's warranties, as set forth
above, and no additional obligations or liabilities shall arise from the producer providing such services.
1.5 The Arduino products are not authorized for use in safety-critical applications where a failure of the product would reasonably be expected to cause
severe personal injury or death. Safety-Critical Applications include, without limitation, life support devices and systems, equipment or systems for the
operation of nuclear facilities and weapons systems. Arduinoproducts are neither designed nor intended for use in military or aerospace applications or
environments and for automotive applications or environment. Customer acknowledges and agrees that any such use of Arduino products which is solely
at the Customer's risk, and that Customer is solely responsible for compliance with all legal and regulatory requirements in connection with such use.
1.6 Customer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its
products and any use of Arduino products in Customer's applications, notwithstanding any applications-related information or support that may be
provided by the producer.
2. Indemnification
The Customer acknowledges and agrees to defend, indemnify and hold harmless the producer from and against any and all third-party losses, damages,
liabilities and expenses it incurs to the extent directly caused by: (i) an actual breach by a Customer of the representation and warranties made under this
terms and conditions or (ii) the gross negligence or willful misconduct by the Customer.
3. Consequential Damages Waiver
In no event the producer shall be liable to the Customer or any third parties for any special, collateral, indirect, punitive, incidental, consequential or
exemplary damages in connection with or arising out of the products provided hereunder, regardless of whether the producer has been advised of the
possibility of such damages. This section will survive the termination of the warranty period.
4. Changes to specifications
The producer may make changes to specifications and product descriptions at any time, without notice. The Customer must not rely on the absence or
characteristics of any features or instructions marked "reserved" or "undefined." The producer reserves these for future definition and shall have no
responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The product information on the Web Site or Materials is
subject to change without notice. Do not finalize a design with this information.
The producer of Arduino has joined the Impatto Zero®
policy of LifeGate.it. For each Arduino board produced is
created / looked after half squared Km of Costa Rica’s
forest’s.

Other manuals for Arduino MEGA 2560

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Arduino MEGA 2560 and is the answer not in the manual?

Arduino MEGA 2560 Specifications

General IconGeneral
MicrocontrollerATmega2560
Operating Voltage5V
Input Voltage (recommended)7-12V
Input Voltage (limit)6-20V
Digital I/O Pins54
PWM Channels15
Analog Input Pins16
DC Current per I/O Pin20 mA
DC Current for 3.3V Pin50 mA
Flash Memory256 KB of which 8 KB used by bootloader
SRAM8 KB
EEPROM4 KB
Clock Speed16 MHz
LED_BUILTIN13
Length101.52 mm
Width53.3 mm
Weight37 g

Related product manuals