Arduino Portenta H7 Series - User Manual

Arduino® Portenta H7 Lite Connected
1 / 20 Arduino® Portenta H7 Lite Connected Modified: 11/05/2022
Product Reference Manual
SKU: ABX00046
Description
Portenta H7 family runs high level codes along with real time tasks thanks to the two processors that makes it
possible to run tasks in parallel. For example, it is possible to execute Arduino compiled code along with
MicroPython one simultaneously, and have both cores to communicate with one another.
Target Areas:
Laboratory equipment, Computer vision

Arduino Portenta H7 Series Specifications

General

Processor	Dual-core Arm Cortex-M7 and Cortex-M4
Clock Speed	480 MHz (Cortex-M7), 240 MHz (Cortex-M4)
Flash Memory	2 MB
SRAM	1 MB
Operating Voltage	3.3V
Input Voltage (recommended)	5V
EEPROM	No
Operating Temperature	-40°C to +85°C
Dimensions	66.04 mm x 25.4 mm
RAM	8 MB SDRAM
Analog Output Pins	2
Connectivity	WiFi, Bluetooth, Ethernet
WiFi	802.11 b/g/n
Bluetooth	Bluetooth 5
USB	USB 2.0
Ethernet	10/100 Ethernet
Camera Interface	Parallel camera interface
CAN	Yes
SPI	Yes
I2C	Yes
UART	Yes

Summary

Description

Features

Ratings

Recommended Operating Conditions

Specifies conservative thermal limits for the board.

Power Consumption

Details power consumption parameters for the device.

Block Diagram

Connector Pinouts

USB-C

Details the pinout configuration for the USB-C connector.

High Density Connector

Functional Overview

Board Topology

Power Tree

Details the power distribution and management system of the board.

Mechanical Information

Board Outline

Connector Positions

FCC Caution