Need help?Do you have a question about the Arduino MEGA 2560 and is the answer not in the manual?
General| Microcontroller | ATmega2560 |
|---|---|
| Operating Voltage | 5V |
| Input Voltage (recommended) | 7-12V |
| Input Voltage (limit) | 6-20V |
| Digital I/O Pins | 54 |
| PWM Channels | 15 |
| Analog Input Pins | 16 |
| DC Current per I/O Pin | 20 mA |
| DC Current for 3.3V Pin | 50 mA |
| Flash Memory | 256 KB of which 8 KB used by bootloader |
| SRAM | 8 KB |
| EEPROM | 4 KB |
| Clock Speed | 16 MHz |
| LED_BUILTIN | 13 |
| Length | 101.52 mm |
| Width | 53.3 mm |
| Weight | 37 g |
Handles TTL serial data transmission and reception via dedicated pins.
Pins that can trigger interrupts on specific event changes.
Pins for reading analog voltage levels with 10-bit resolution.
To Next Page
