Need help?Do you have a question about the Arduino WisGate Edge Pro and is the answer not in the manual?
General| Model | WisGate Edge Pro |
|---|---|
| Category | Gateway |
| Processor | Quad-core ARM Cortex-A53 |
| RAM | 1 GB |
| Storage | 8 GB eMMC |
| LoRa Channels | 8 |
| Max Output Power | 27 dBm |
| Bluetooth | Bluetooth 4.2 |
| GPS | Yes |
| USB | 1 x USB 2.0 |
| Power Input | 12V DC |
| Ingress Protection | IP65 |
| LoRa Frequency Bands | EU868, US915, AS923 |
| Ethernet | 10/100/1000 Mbps |
| Wi-Fi | 802.11 b/g/n |
| Cellular | Optional LTE |
| Operating Temperature | -20°C to +60°C |
| Power Supply | Included |
Provides the official address of Shenzhen RAKwireless Technology Co., Ltd.
Guides users to read the manual and documentation for safe commissioning and further product information.
Details the main model RAK7289XXX and its sub-models (C, V2, H) with their meanings.
Lists key features of the WisGate Edge Pro, including LoRaWAN stack, Wi-Fi AP, Ethernet, and OpenWRT support.
Explains the status and meaning of various LEDs on the gateway (PWR, ETH, LoRa1, LoRa2, WLAN, LTE).
Details how to connect to the gateway using Wi-Fi AP Mode and the default IP address.
Explains how to connect via Ethernet, including IP addressing and credentials.
Provides CE certification details and links to the EU declaration of conformity.
Outlines FCC compliance rules, cautions against modifications, and explains interference correction measures.
Specifies FCC radiation exposure limits and minimum installation distances for the device.
Details ISED compliance, including licence-exempt transmitter rules and interference acceptance.
To Next Page