Ardwolf A1 User Manual

Ardwolf A1 Quick Start Guide
INTRODUCTION
Thank you for choosing the Ardwolf A1 fingerprint keypad lock. No more worries about losing
your keys!
There are three ways to unlock the Ardwolf A1:
(A) Fingerprint – Place finger on sensor
(B) User code – Enter user code number and press #
(C) Key – Insert key and turn clockwise 180
*For increased security, a “Double verification mode” option is available, see user manual for
details.
CHANGE THE PROGRAMMING CODE (PASSWORD)
IMPORTANT NOTES:
⦁ As a precaution, you should change the default Programming Code or password to
insure that no one else can make changes to the door lock settings.
⦁ To verify that you have pressed a button successfully, you should hold down the button
until you hear a beep and see a blue light, then release the button.
⦁ During the setup, there is a 5 second time limit between button presses. If you wait over
5 seconds without pressing a button, the door lock keypad will flash red twice and then
exit the current setup (losing unsaved changes). So make sure to enter button presses
within 5 seconds of each other to complete all steps.
To begin changing Programming Code
(password), press 0 and then * to start login
Enter the default Programming Code (1234) and
then press #.
Choose and enter your new password (which can
be 4-12 digits long) and then press *
___ ___ ___ ___
1

Ardwolf A1 Specifications

General

Brand	Ardwolf
Model	A1
Category	Locks
Language	English

Summary

Ardwolf A1 Quick Start Guide Introduction

Ardwolf A1 Unlock Methods Overview

Lists the three primary ways to unlock the Ardwolf A1: fingerprint, user code, and key.

Double Verification Security Mode

Mentions an optional security feature for enhanced protection, directing users to the full manual.

Changing the Ardwolf A1 Programming Code

Important Setup Notes for Programming Code

Advises changing the default code for security and explains critical setup feedback like beeps and lights.

Procedure to Change Programming Code

Details the sequence of button presses to change the programming code, including verification.

Adding the First Administrator Fingerprint

Fingerprint Addition Setup Guidelines

Covers fingerprint capacity, User ID allocation, and the significance of Administrator IDs 0-2.

Procedure for Adding Administrator Fingerprint

Outlines the process to initiate setup, enter the programming code, and register the first fingerprint with a User ID.

Unlocking with Your Added Fingerprint

Correct Finger Placement for Sensor

Illustrates and describes the proper technique for placing a finger on the sensor for successful authentication.

Fingerprint Authentication Feedback

Explains the audio (beeps) and visual (lights) feedback for successful or failed fingerprint recognition.

Handling Fingerprint Rejection

Describes the system's response to multiple failed attempts and how to reset the fingerprint sensor.

Adding More Fingerprints and Users

Process for Adding Additional Fingerprints

Details repeating the fingerprint addition steps, emphasizing the use of unique User IDs for each new entry.

Adding User Codes for Numeric Unlock

User Code Setup Considerations

Notes the capacity for user codes and how the system handles setup errors by timing out.

Procedure for Adding a User Code

Guides through the steps to add a numeric user code, including programming code entry and code verification.

Ardwolf A1 Key Unlock Procedure

Using the Mechanical Key for Access

Explains the procedure for inserting and turning the physical key to lock and unlock the door.