Original User Manual – AREBOS Mini Heat Pump
5
Thank you for using this mini pool heat pump for your pool heating, it will heat your pool water and
keep the constant temperature when the air ambient temperature is at 9 to 40℃ and the pool water
temperature is at 9 to 40℃.
This appliance is intended to be used by expert or trained users in shops, in light industry and on
farms, or for commercial use by lay persons.
Electrical protection
The power supply for the heat pump must come, preferably, from an exclusive circuit with regulatory
protection components (30mA differential protection) and a magneto-thermal switch.
• The electrical installation must be carried out by a specialized professional (electrician) in
accordance with the standards and regulations in force in the country of installation.
• The heat pump circuit must be connected to a safety earth circuit at the terminal block.
• The cables must be properly installed to prevent interference. If damaged, it must be
replaced by the manufacturer, its service agent or similarly qualified persons in order to
avoid a hazard.
• The pump is intended for connection to a general power supply with earth connection.
• Section of the cable; This section is indicative and should be checked and adapted according
to the needs and conditions of use.
• The tolerance of acceptable voltage variation is +/- 10% during operation.
The connections must be dimensioned according to the power of the device and the state of
installation.
These values are given as a guideline, only the intervention of an authorized technician can
determine the values corresponding to your installation.
The electric line must be equipped with a ground connection and with a circuit breaker with
difference 30mA in head.
ATTENTION:
• This manual includes all the necessary information with the use and the installation of your
heat pump.
• The installer must read the manual attentively and follow the instructions in implementation
and maintenance.
• The installer is responsible for the installation of the product and should follow all the
instructions of the manufacturer and the regulations in application. Incorrect installation
against the manual implies the exclusion of the entire guarantee.
• The manufacturer declines any responsibility for the damage caused with the people, objects
and of the errors due to the installation that disobey the manual guideline. Any use that is
without conformity at the origin of its manufacturing will be regarded as dangerous.
To Next Page
Loading...