AREBOS AR-HE-WP - Transport and Storage Guidelines; Packaging Handling Upon Delivery; Storage and Handling Recommendations

Original User Manual – AREBOS Mini Heat Pump
7
3 Transport information
Delivery of the packaging
For the transportation, the heat pump is covered with a carton box. To preserve from any damage,
the heat pump must be transfer on is pallet.
All material, even if the transport is chargeable to supplier, can be damaged during its routing at the
customer and it is the responsibility of the addressee to make sure of the correspondence of the
delivery.The addressee has to written all the reserves at the reception on the delivery note of the
carrier if he notices damages of the packaging.
DO NOT FORGET TO CONFIRM BY REGISTERED LETTER TO THE CARRIER UNDER 48 H.
Stock advice
Heat pump must be stored and transfer in vertical position in its original packaging. If it is not the
case, she cannot be operated at once, a minimum period of 24H is necessary before to switch on the
electrical power.
FORBIDDEN
Transfer to the final position
During the unpacking of the product and the transfer from is palette of origin to final place, it is
necessary to maintain the heat pump vertical position.
Water connection are not there to assure the function of handle, on the contrary support the weight
of the heat pump on the water connection must be damage definitively the product. The
manufacturer could not be take the responsible in case of damage.