AREBOS AR-HE-WP - Start-up and Operation; Control Panel Functions and Settings; Operational Indicators and Error Codes

Original User Manual – AREBOS Mini Heat Pump
8
4 Start-up of the Heat Pump
1. ON/OFF : Press for 2 seconds , start or stop the heat pump
2. Long press for 6 seconds, then press or to exchange C or F
ATTENTION: THESE SETTING SHOULD SWEEP ALL THE PREVIOUS SETTING
3. Water Temperature Setting: Press once, "SV" lighting! Press to up or press down.
4. Press to check the CT when the heat pump is running.
5. That the icon is flashing means preparing to work, and that the icon is lighting means
working.
6. E1 or E2 means the sensor is not working please call the service.