9
How to share Arenti devices with friends and family?
Arenti APP >> Device (Tap device to live video page) >> Settings >> Device Share >>
Add, follow the guide to share your device.
Failed to access the Live video, prompts offline?
1. Please ensure the camera is in the power-on state: camera network indicator will
on.
2. Check the Wi-Fi network is in good condition and restart the router.
3. Try to move the camera near the router and check again.
4. Delete the camera from Arenti APP and add it again. Confirm the APP and camera
firmware are the latest versions. If there doesn’t work, please share the camera
indicator status and camera SN (Find on camera body) to support@arenti.com to
get help.
Basic Parameters
Micro SD card (up to 128GB)
iOS 9 / Android 5.0 and above version
Precautions
The applicable working temperature of this product is -20°C ~ 50°C, please do not
use it in an environment where the temperature is too high or too low use this
product.
To use this product better, avoid the front and side of the lens close to the glass,
while walls, etc. light objects, so as not to cause the picture to be bring near, dark,
or whitish in the distance.
Please make sure that the camera is installed within the range covered by Wi-Fi
signal, and placed as far as possible on the location where the signal is better and
try to install it away from metal and microwave ovens that may affect the signal.
To Next Page
Loading...
