Areva MiCOM P921 - Page 141

Technical Guide P92x/EN FT/E11
User Guide
MiCOM P921-P922-P923 Page 63/110
BLOCK1 tV0>>>=
NO
Description : selection of the time-delayed information
“tV0>>>”, which will be blocked by energisation of the “BLK
LOG1” logic input.
Range : YES/NO
BLOCK1 tAUX1 =
NO
Description : selection of the time-delayed information
“tAUX1”, which will be blocked by energisation of the “BLK
LOG1” logic input.
Range : YES/NO
BLOCK1 tAUX2 =
NO
Description : selection of the time-delayed information
“tAUX2”, which will be blocked by energisation of the “BLK
LOG1” logic input.
Range : YES/NO
11.3.3 Additional information for the MiCOM P922 and P923 relay
BLOCK1 tV2>=
NO
Description : selection of the time-delayed information “tV2>”,
which will be blocked by energisation of the “BLK LOG1” logic
input.
Range : YES/NO
BLOCK1 tV2>>=
NO
Description : selection of the time-delayed information
“tV2>>”, which will be blocked by energisation of the “BLK
LOG1” logic input.
Range : YES/NO
BLOCK1 tV1<=
NO
Description : selection of the time-delayed information “tV1<”,
which will be blocked by energisation of the “BLK LOG1” logic
input.
Range : YES/NO
BLOCK1 tV1<<=
NO
Description : selection of the time-delayed information
“tV1<<”, which will be blocked by energisation of the “BLK
LOG1” logic input.
Range : YES/NO
BLOCK1 tF1 =
NO
Description : selection of the time-delayed information “tF1”,
which will be blocked by energisation of the “BLK LOG1” logic
input.
Range : YES/NO
BLOCK1 tF2 =
NO
Description : selection of the time-delayed information “tF2”,
which will be blocked by energisation of the “BLK LOG1” logic
input.
Range : YES/NO
BLOCK1 tF3 =
NO
Description : selection of the time-delayed information “tF3”,
which will be blocked by energisation of the “BLK LOG1” logic
input.
Range : YES/NO
BLOCK1 tF4 =
NO
Description : selection of the time-delayed information “tF4”,
which will be blocked by energisation of the “BLK LOG1” logic
input.
Range : YES/NO
BLOCK1 tF5 =
NO
Description : selection of the time-delayed information “tF5”,
which will be blocked by energisation of the “BLK LOG1” logic
input.
Range : YES/NO
BLOCK1 tF6 =
NO
Description : selection of the time-delayed information “tF6”,
which will be blocked by energisation of the “BLK LOG1” logic
input.
Range : YES/NO