How to get rid of bad smell from Argo Air Conditioner?
To address unpleasant smells from your Argo Air Conditioner, identify and eliminate any odour sources such as furniture or cigarettes. Also, clean the filter.
Why is my Argo X3I ECO PLUS not reaching the desired temperature?
If the desired level of heating/cooling cannot be achieved by your Argo Air Conditioner, try the following: Ensure that the voltage is normal. Clean the filter. Adjust the temperature to the available range. Close any doors and windows.
Why is my Argo Air Conditioner not working?
If your Argo Air Conditioner isn't working, try these steps: wait for the power to be restored, reinsert the plug, wait 3 minutes before restarting the unit, or reset the function. If these steps don't work, have the circuit breaker or fuse replaced by a qualified technician, or have the unit itself replaced by a qualified technician.
Why is my Argo Air Conditioner not cooling/heating to the desired level?
If your Argo Air Conditioner isn't heating or cooling as expected, first wait for the voltage to return to normal. Then, clean the filter. Ensure the temperature is within the adjustable range and close all doors and windows.
Why does my Argo Air Conditioner produce mist?
If the indoor unit's air outlet of your Argo Air Conditioner produces a mist, it may be due to high indoor temperature and humidity. Wait for the indoor temperature and humidity to fall, and the mist should disappear as the air cools.
Why does my Argo X3I ECO PLUS Air Conditioner make creaking noises?
If you hear creaking or cracking noises from your Argo Air Conditioner, and the unit has recently been turned on or off, it is likely the sound of friction caused by the expansion and/or contraction of the panel or other parts due to temperature changes.
Why does my Argo X3I ECO PLUS Air Conditioner unit emit unpleasant smells?
If your Argo Air Conditioner smells unpleasant, eliminate the source of the odor and clean the filter.
Why does the Argo X3I ECO PLUS Air Conditioner turn on suddenly?
If your Argo Air Conditioner turns on suddenly, disconnect the power supply and then reconnect it, and turn the unit on again.
Why does my Argo Air Conditioner produce mist from the indoor unit?
If the indoor unit's air outlet of your Argo Air Conditioner produces a mist, this occurs when indoor air cools rapidly. Wait for the indoor temperature and humidity to fall, and the mist should disappear.
Why can't I adjust the temperature on my Argo X3I ECO PLUS?
If the set temperature on your Argo Air Conditioner cannot be adjusted, it may be in automatic mode. Change the operating mode if you want to adjust the temperature. Also, ensure that the temperature you are trying to set is within the range of 16 – 30°C.
General| Cooling Capacity | 9000 BTU/h |
|---|---|
| Cooling Power | 800 W |
| Energy Efficiency Class Cooling | A++ |
| Refrigerant | R32 |
| Power Supply | 220-240V/50Hz |
To Next Page
