To Next PageTo Next PageWhat to do if my Argo Air Conditioner is not working?
If your Argo Air Conditioner isn't working, try these steps: First, ensure the unit is properly plugged in. If it is, check the circuit breaker or fuse and have it replaced by a qualified technician if necessary. If there was a power outage, wait for the power to be restored. You can also try waiting 3 minutes before restarting the unit or resetting the function.
Why is my Argo X3 ECO PLUS not reaching the desired temperature?
If the desired level of heating/cooling cannot be achieved by your Argo Air Conditioner, try the following: Ensure that the voltage is normal. Clean the filter. Adjust the temperature to the available range. Close any doors and windows.
How to fix Argo X3 ECO PLUS Air Conditioner remote control not working?
If your Argo Air Conditioner remote control isn't working or the indoor unit isn't receiving the signal, try these steps: Ensure you're within 8 meters of the unit and that there are no obstacles. Point the remote directly at the receiver on the indoor unit. Check and replace the batteries if they are low. If the remote is damaged, replace it. You can also try pulling out the plug, waiting about 3 minutes, and then reinserting it to restart the unit.
Why no air comes out of my Argo X3 ECO PLUS indoor unit?
If no air is coming out of the indoor unit of your Argo Air Conditioner, check for obstructions blocking the airflow. Also, the unit will stop blowing air once the set temperature is reached. If the unit has just been turned on, there may be a delay of several minutes to prevent blasts of cold air.
How to stop Argo X3 ECO PLUS Air Conditioner from emitting bad smells?
If your Argo Air Conditioner is emitting unpleasant smells, try to eliminate the odour source and clean the filter.
Why can't I adjust the temperature on my Argo Air Conditioner?
If the set temperature on your Argo Air Conditioner cannot be adjusted, it may be in automatic mode. Change the operating mode if you want to adjust the temperature. Also, ensure that the temperature you are trying to set is within the range of 16 – 30°C.
What to do if my Argo X3 ECO PLUS turns on suddenly?
If your Argo Air Conditioner turns on suddenly, disconnect the power supply and then reconnect it. Turn the unit on again.
Why does my Argo Air Conditioner produce mist from the indoor unit?
If the indoor unit's air outlet of your Argo Air Conditioner produces a mist, this occurs when indoor air cools rapidly. Wait for the indoor temperature and humidity to fall, and the mist should disappear.
Why does my Argo X3 ECO PLUS outdoor unit produce steam?
Steam production from the outdoor unit of your Argo Air Conditioner during defrosting in heat mode is normal.
Why does my Argo X3 ECO PLUS Air Conditioner sound like running water?
The sound of running water in your Argo Air Conditioner is produced by the refrigerant flowing inside the unit, which is a normal phenomenon.
General| Brand | Argo |
|---|---|
| Model | X3 ECO PLUS |
| Category | Air Conditioner |
| Language | English |
Details about the R32 refrigerant, its properties, and safety.
Safety guidelines for operating and handling the air conditioner.
Identification and description of parts of the indoor unit.
Identification and description of parts of the outdoor unit.
Overview and function of each button on the remote control.
Explanation of various icons displayed on the remote control.
Detailed explanations of remote control button functions.
Functions triggered by pressing multiple buttons.
How to lock remote buttons and switch temperature display.
Basic steps for operating the air conditioner.
Procedures for replacing batteries in the remote control.
Instructions for connecting and operating the air conditioner via Wi-Fi.
Guide to downloading, installing, and registering for the EWPE SMART app.
Setting modes, temperature, fan speed, and advanced functions via app.
Homepage menu, group control, home management, help, feedback, and WiFi reset.
Procedures for cleaning the indoor unit and its filters.
Table listing common faults and corresponding solutions.
Explanation of error codes and critical issues requiring technician assistance.
Visual guide to unit placement, clearances, and critical safety warnings.
Guidelines for selecting unit locations and electrical connection safety.
Step-by-step guide for mounting and connecting the indoor unit.
Guidelines for outdoor unit installation, handling, and technical spaces.
Guidelines for connecting refrigerant pipes and required equipment.
Steps for using a vacuum pump to remove air and humidity from the circuit.
Instructions for performing operational checks after installation.
Details on connecting tube lengths, height differences, and refrigerant charging.
Technician qualifications and guidelines for installing flammable refrigerant units.
Checks, welding, and refrigerant filling processes for safety.
Detailed steps for cutting, preparing, and inspecting pipes for extension.
Information on R32 refrigerant, its GWP, and release prohibition.
