41
Mounted accessories
Accessories / maintenance / spare parts
Lighting system
Your pedelec is tted with modern lighting tech-
nology. In addition to the conventional features,
it also offers you safety functions such as a
standlight. This means that if you are stationary
at night, e.g. at a trafc light, you are still visible
to other public road trafc participants. Equally,
some models are equipped with the newly de-
veloped daytime lights. These are supplied by
various energy sources depending on the riding
situation. For more on this, please read the in-
structions supplied by the component manufac-
turer.
Clean the reectors and headlights
of the lighting system at
regular intervals! Warm water and
washing up liquid sufce for this job. Keep
contact points clean and conductive with a
suitable maintenance oil!
Please read the operating instruc-
tions supplied for your light system.
5 m
e. g. 1 m
0,5 m
Bike lights
The type of replacement light bulbs depend on
the lighting system installed in your pedelec. The
following list provides a guide for nding the right
bulb.
Lighting
used
Bulb
information
Bicycle lights 6 V 2.4 W
Bicycle lights
Halogen
6 V 0.6 W
Rear lamp 6 V 0.6 W
Rear light with
standlight
6 V 0.6 W
LED lighting LEDs
cannot be replaced
Dynamo 6 V 3 W
Hub dynamo 6 V 3 W
The lighting system is key and it is
vital that it is proper
working condition. Only have check-
up and servicing work done by authorised
specialist retailers after failures or tempo-
rary problems!
Riding with luggage
Luggage load changes the behav-
iour of your pedelec. It extends the
braking distance, among other
things. This may lead to severe accidents.
Please adjust your riding style to this, i.e.
brake earlier and anticipate more sluggish
steering. Only transport baggage on racks
intended for this purpose! Never attach a
baggage rack to the seat post! It is not de-
signed for this purpose. Overloading of the
seat post by a luggage rack can break the
seat post and lead to serious accidents!
• Only mount child seats on baggage racks
if they have the corresponding holders and
the manufacturers permit this.
• Please ensure that nothing can get caught
in the spokes and spinning wheels.