3.6 Setting up iNet2+ for “Play To” Windows 7 streaming media feature.
To set-up Argon iNet2+ to be controlled and to stream music via Windows Media Player 12 (Windows 7 only),
perform the following steps:
1. Ensure that the PC is connected to the network.
2. Ensure that iNet2+ is powered on and connected to the same network.
Note: iNet2+ must be in an Internet radio mode to be detected.
3. From the Windows 7 main screen,
select Start > Devices and Printers.
4. Select the Add a device tab in the top left of the Devices
and Printers window and follow the instruction prompts given
by the wizard.
To Next Page
Loading...
