Argus 3 User Manual

 e2v technologies (uk) limited 2014 118707 P7030UM version 6, page 1
THERMAL IMAGING CAMERA SYSTEM
SAFETY NOTES
Before using this product, the customer shall read and understand all the
instructions and warnings. e2v technologies does not accept responsibility for
damage or injury resulting from failure to follow the instructions provided.
Refer to PSD775845A for safety and warning notes.
FCC Compliance Information (US)
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
Any modification not approved by e2v could void the user’s authority to operate this
equipment.

Argus 3 Specifications

General

Field of View	24° x 18°
Spectral Range	8 - 14 μm
Focus	Fixed
Operating Temperature	-15 °C to +50 °C
Storage Temperature	-40 °C to +70 °C
Power Supply	Rechargeable Li-ion battery
Interface	USB

Summary

SAFETY NOTES

FCC Compliance Information (US)

Information regarding the device's compliance with US FCC Rules and potential interference.

INTRODUCTION

OPERATION AND USE

System Configuration

Details the physical components and layout of the Argus®4 camera system.

Getting Started

Guidance on initial setup, battery charging, and powering on the Argus®4 camera.

Camera Features

Overview of the Argus®4's capabilities, including colour palettes, sensitivity modes, and zoom functions.

Display Warning Graphics

Explains the visual alerts for over-temperature and general system failures shown on the display.

Operating Notes

Provides guidance on interpreting thermal images, identifying hot spots, and effective camera usage.

MENU CONTROL FUNCTIONS

Menu Access and Navigation

Explains how to access and navigate the camera's menu system using remote control or buttons.

Menu Item Functions

Details on specific menu functions like Date/Time, Colour Mode, OSD Colour, and language settings.

RECHARGEABLE BATTERY PACK AND CHARGER

Battery Pack Details

Information on the Argus®4 battery packs, their capacity, and the battery status indicator.

Battery Indicator and Charger Operation

Explains the battery age indicator and provides warnings/cautions for the battery charger.

SOFTWARE & CUSTOMER CD

Customer Software Functions

Details on the PC software for managing images, settings, and status reports.

CLEANING, MAINTENANCE AND REPLACEABLE PARTS

Cleaning and Maintenance Procedures

Procedures for cleaning the camera and routine maintenance checks.

Replaceable Parts and Accessories List

Lists user-replaceable parts and available accessories with their part numbers.

APPENDICES

Software and Patent Notices

Information on Ateme software, MPEG-4 patent licensing, and product trademarks.