Ariens 915039 - Steering Lever Adjustments

4 - 14
6. Move top jam nuts down to tighten on the nyloc
jam nut. Tighten the jam nuts against each other.
7. Return to step one and repeat until the unit tracks
straight.
4.8 STEERING LEVER ADJUSTMENTS
Adjusting Steering Levers to Match (Figure 10)
NOTE: Each steering lever can be positioned further
forward or further backward.
1. Loosen mounting hardware.
2. Position steering levers to match.
3. Tighten mounting hardware.
Adjusting Height of Steering Levers (Figure
10)
There is a low and a high position for steering levers.
Remove mounting hardware and place steering levers
in the low or high position.Tighten mounting hardware.
Figure 9
1. Rod Transaxle
2. Switch
3. Jam Nuts
4. Nyloc Jam Nut
5. Handlebar
6. Dampener
1
2
3
4
5
1
2
3
6