Ariens 926310-ST9526DLE

Questions and Answers

E
Elizabeth GarciaAug 12, 2025
Why won't my Ariens 926310-ST9526DLE Snow Blower engine crank or start?
- V
  Veronica PruittAug 12, 2025
  If your Ariens Snow Blower engine won't crank or start, several factors could be the cause. These include: * An empty fuel tank: Refill the fuel tank. * A closed fuel shut-off valve: Open the fuel shut-off valve. * Dirt and residue buildup around the governor/carburetor: Clean the area around these components. * Key switch not in the run position: Put the key switch in the run position. * A non-functioning ignition switch starter circuit: Check the starter and its connections. * A discharged battery or loose wires: Inspect the battery and connections. * A blown fuse on the wiring harness: Replace the fuse. * A malfunctioning electric starter: Check the starter and its connections.
C
catherine85Aug 17, 2025
What to do if my Ariens Snow Blower engine stops?
- D
  Daniel GordonAug 17, 2025
  If your Ariens Snow Blower engine suddenly stops, consider these possible causes: * The fuel tank is empty: Refill it. * The fuel shut-off valve is closed: Open it. * There's a mechanical jam in the blower rake or impeller: Turn off the engine, remove the key, wait for all moving parts to stop, then check for and remove any obstructions before restarting. * The fuel supply is polluted: Replace it with clean fuel. * The spark plug is faulty: Replace or clean the spark plug.
D
Diane Bryant DDSAug 23, 2025
Why does my Ariens Snow Blower unit throw snow poorly or not throw snow at all?
- S
  Stephen ThompsonAug 23, 2025
  If your Ariens Snow Blower isn't throwing snow well, check the following: * Broken shear bolts: Replace them. * Improperly adjusted attachment clutch/brake: Adjust the attachment clutch/brake. * Auger is frozen in place: Move the unit to a warmer location to thaw it out. * Ice or debris obstructing the auger: With the engine off and auger disengaged, check for and remove any obstructions. * Slipping, worn, or damaged attachment drive belts: Adjust or replace the attachment drive belts.
M
Michelle WeberAug 30, 2025
What to do if Ariens 926310-ST9526DLE Snow Blower does not operate in Forward / Reverse?
- T
  travisharrisAug 30, 2025
  If your Ariens Snow Blower isn't moving forward or in reverse, it could be due to: * A friction disc that isn't adjusted properly: Repair or replace the friction disc. * A traction belt that isn't functioning: Repair or replace the traction drive belt. * A speed selector that isn't adjusted correctly: Adjust the speed selector.
E
Eric ReedSep 5, 2025
Why are there small rubber beads collecting in the frame of my Ariens 926310-ST9526DLE?
- C
  chadbrooksSep 5, 2025
  The collection of small rubber beads in the frame of your Ariens Snow Blower is typically due to normal friction disc wear. However, if you notice chunks or large pieces of rubber, the friction disc should be checked and replaced if necessary.

Ariens 926310-ST9526DLE Specifications

General

Engine Displacement (cc)	254
Clearing Width (in)	26
Clearing Depth (in)	21
Drive System	Disc-O-Matic
Drive Type	Wheel Drive
Speed Settings	6 Forward/2 Reverse
Chassis	Steel
Weight (lbs)	240
Impeller Diameter (in)	12
Chute Rotation	200°
Headlight	Yes
Tire Size (in)	15 x 5
Oil Capacity (oz)	20
Product Type	Two-Stage Snow Blower
Starting System	Electric/Recoil
Auger Type	Steel Serrated
Chute Control	Remote