1
Date: 3/12/2013 No. B-2103
Ariens Company has received a small number of reports of chain and sprocket failures on Hydro Pro
models in the model and serial number ranges listed above. There can be two failure modes:
• the chain (p/n 02466200 for wheel-driven units, p/n 03232800 for track driven units) between the
hydrostatic transmission and the pinion shaft comes off the sprocket/gear (p/n 52601500 or 52611500)
during operation, or
• the sprocket (p/n 04375800) on the hydrostatic transmission output shaft floats far enough on the shaft
that the key (p/n 06606100) can come out and be lost during operation.
These failures can occur if the transmission bracket (p/n 04371200) is formed to a tolerance that does not
set correct tension on the chain.
To correct this problem, Ariens Company has developed a service kit that will set the tension on the chain
and eliminate the problem from recurring.
• Wheel-driven units use kit 52611700
• Track-driven units use kit 52611900
Dealer Action:
In the case of a failure as described above, dealers are to install service kit 52611700 or 52611900 on the
affected unit.
For unsold inventory, dealers are to inspect the chain on the unit and determine if the chain tension is too
loose.
Ariens Company
655 W. Ryan St.
Brillion, WI 54110
www.ariens.com
Service Bulletin
Product Family: 926 Series Snow Throwers with Hydrostatic Transmissions
Subject: Chain and Sprocket Failures
Dealer Action: Inspect and Install Parts as Necessary
Model Description Serial Number
Range
926053 Hydro Pro 28DLE 101 – 693
926054 Hydro Pro 32DLE 101 – 380
926055 Hydro Pro 36DLE 101 – 248
926056 Hydro Pro 28DLE Track 101 – 266
926326 Hydro Pro 28 CE 101 – 168
926328 Hydro Pro 32 DLE CE 101 – 150
To Next Page
Need help?
General
