Ariens IKON-X User Manual

EN - 10
Transporting Unit
Use extra care when loading or unloading
the machine into a trailer or truck.
Secure unit chassis to transport vehicle.
NEVER secure from rods or linkages that
could be damaged.
DO NOT transport machine while engine is
running.
ALWAYS turn off power to attachment and
shut off fuel when transporting unit.
Storage
NEVER store unit with fuel in fuel tank inside
a building where any ignition sources are
present.
Keep machine free of grass, leaves or other
debris build-up. Clean up oil or fuel spillage
and remove any fuel-soaked debris. Allow
machine to cool before storing.
For extended storage, close fuel shut off
valve and clean unit thoroughly. See engine
manual for proper storage.

Ariens IKON-X Specifications

General

Engine Brand	Kawasaki
Engine Power	23 hp
Cutting Width	52 inches
Transmission Type	Hydrostatic
Deck Material	Steel
Engine	Kawasaki FR691V
Engine Displacement	726 cc
Cutting Height	1.5 - 4.5 inches
Weight	635 lbs
Warranty	3 years
Speed	7 mph
Fuel Capacity	2.8 gallons