15
Cleaning and Storage
Transport
Cleaning and Storage
IMPORTANT: NEVER spray unit with water or store
unit outdoors to aid in prevention of rust or corrosion.
Water can seep into sealed bearings, which are
sealed against dirt and debris only, causing reduced
component life.
WARNING: Never store tiller in an
enclosed area where fuel fumes may
reach flame, sparks, pilot lights or an
ignited object. Drain fuel outdoors
away from any ignition source. Use
only approved fuel container.
Your authorized Ariens Dealer is trained and
equipped to service your tiller. A periodic checkup by
your dealer will help reduce your maintenance costs.
Unit
Store tiller in a cool, dry protected place.
Inspect tiller for visible signs of wear, breakage or
damage. Order any parts required and make
necessary repairs to avoid delays when beginning
use again.
Clean tiller thoroughly. Touch up all unpainted areas
to avoid rust.
Engine
When storing tiller for an extended period refer to
Engine Manufacturer’s Instruction Manual.
Always secure unit to truck or trailer to prevent it form
sliding or tipping over.
Never secure unit from linkages or rods that may be
damaged.
IMPORTANT: The Fuel Shut Off Valve must be
turned to the “OFF” position for transport, to prevent
fuel from leaking out of the carburetor during
transport.
Service Manual
Publications are available for tiller owners who wish
to perform some of their own maintenance and
service operations. Should a complete parts and/or
repair manual be desired, use the convenient order
form supplied with your warranty registration or order
by machine model and serial number.
Rear Tine Rotary Tiller
Service Manual
Tiller Model Number
Tiller Serial Number
Mail Requests to: Ariens Service
655 West Ryan Street
P.O. Box 157
Brillion,WI 54110-0157
Components commonly used for consumer service,
can be ordered through your Ariens Dealer. When
ordering parts always include the Model and Serial
Number of your unit to assure prompt service.
To Next Page
Loading...
Need help?
General
