EN - 25
SPECIFICATIONS
Model Number 920402 920406
Description Sno-Tek 24E Sno-Tek 20
Engine Sno-Tek 208 Sno-Tek 136
Gross Torque* – N•m (lb-ft) 12.9 (9.5) 9.5 (7.0)
Displacement – cm
3
(in
3
)
208 (12.7) 136 (8.3)
Maximum RPM – No load 3600 ± 100
Electric Start 120V N/A
Fuel Tank Capacity – liter (qt) 1.4 (1.5)
Chute
Chute Rotation Angle 205°
Rotation Control 2.5X Quick Turn
Deflector Control In-dash Lever Manual
Auger
Snow Clearing Width – cm (in) 61.0 (24.0) 50.8 (20.0)
Gearcase Aluminum
Auger Diameter – cm (in) 27.9 (11.0)
Impeller
Impeller Diameter – cm (in) 30.5 (12.0)
Impeller Speed (RPM) 1190 1071
Impeller Tip Speed – m/sec (ft/sec) 19.0 (62.3) 17.1 (56.1)
Drive
Auger HA Belt
Traction
Disc-O-Matic
®
Speeds 6 Forward and 2 Reverse
Axle Control Pin-Lock
Tires
Size – in 13 x 4.10-6 Polar Trac
Pressure See tire sidewall.
Size and Weight
Length – cm (in) 131.8 (51.9)
Height – cm (in) 110.0 (43.3)
Width – cm (in) 67.1 (26.4) 56.9 (22.4)
Weight – kg (lb) 81.6 (180.0) 79.8 (176.0)
*Engine output stated in gross torque per SAE J1940 as rated by engine manufacturer.
To Next Page
Loading...
Need help?
General
