ARIETE 1342 - Maintenance and Cleaning; Cleaning Components

10
EN
86()8/7,367235(3$5($*22'&2))((
 To get a tasty coffee it is necessary to keep the appliance clean. 3erform the cleaning and des
caling regularly as described in the Cleaning the machine paragraph.
 Always use fresh, clean water.
 With ¿ner milling richer and fullbodied coffees are obtained. A regular grind, will require more
coffee to get the usual taste that is made from ¿nely milled mixtures.
 Keep the coffee powder in a cool, dry place. Seal opened containers and leave them in the
refrigerator.
 )or the best taste, buy coffee beans and grind them before preparation.
 +eated coffee does not taste good. The coffee reaches its best taste immediately after preparation.
 The presence of small drops of oil on the coffee surface can be caused by prolonged use of
toasted mixtures: clean regularly.
$33/,$1&(&/($1,1*
This appliance requires little maintenance. It contains no parts which can be repaired by the user.
Any operation requiring disassembly of parts must be performed by an Authorized Service Center.
Warning!
All cleaning operations described below must be carried out with the machine off and with the
plug disconnected from the outlet.
Warning!
5egular maintenance and cleaning keep the machine ef¿cient for a longer period. Never
wash machine components in the dishwasher. Do not use direct jets of water.
Warning!
Any intervention must be carried out with cold machine.
&OHDQLQJWKHÀOWHUDQGWKHÀOWHUKROGHU
After each use, remove the coffee ¿lter from the ¿lter holder. 5emove the coffee residues from the ¿l
ter. 5inse the ¿lter with fresh, clean water. Take out the ¿lter holder and wash it with hot soapy water.
&OHDQLQJWKHFDUDIH
Warning!
To avoid breaking the jug, lift it gently. Avoid knocking the jug against other objects: danger
of glass breakage. When ¿lling the jug with water to avoid hitting the tap.
5inse the jug with hot water and soap. Wash the coffee residues from the jug lid using a brush.
Clean the jug using a damp soft cloth to avoid damaging the glass surface. Do not use metal scour
ing pads or other abrasive materials.
Tank cleaning
It is advisable to periodically clean inside the tank with a sponge or damp cloth.