6.INSTALLATION INSTRUCTIONS
LOCATION
Your installation location should meet the following requirements:
●The unit should be placed on a firm foundation to minimize noise and
vibration. For safe and secure positioning. place the unit on a
smooth, level floor strong enough to support the unit.
●The unit has casters to aid placement, but it should only be rolled
on smooth, flat surfaces. Use caution when rolling on carpeted
surfaces. Use caution and Protect floors when rolling over wood
floors. Do not attempt to roll the unit over objects.
●The unit must be placed within reach of a properly rated
grounded socket.
● Never place any obstacles around the air inlet or outlet of the unit.
● Allow at least 45cm of around and above space away from the
wall for efficient working.
●DO NOT cover the Intakes, Outlets or Remote Signal Receptor of
the unit, as this could cause damage to the unit.
SUGGESTED TOOLS FOR WINDOW KIT INSTALLATION
● Screwdriver(Medium size Phillips)
●Tape measure or ruler
●Knife or scissors
● Saw (Optional, In the even that the window kit needs to be cutdown in size because the window is too narrow
for direct installation).
do not cover
the appliance
To Next Page
Loading...