NOTE: Please be sure that the height of and section of the drain hose should not be higher than that of the
drain outlet, or the water tank may not be drained
WATER DRAINAGE(cont.)
●Continuous Draining for Dry Mode
1. Unplug the unit from the power source.
2. Remove the botton drain cap.While doing this operation
some residual water may spill so have a drip pan(locally
purchased)
to collect the water
3. Connect the drain hose (1/2" or 12.7mm, maybe not upplied ).
4. The water can be continuously drained through the hose into a
floor drain or bucket.
5. Turn on the unit.
NOTE:The supplied drain hose can be substituted with a standard
garden hose for middle drainage only.
NOTE: Please be sure that the height of and section of the drain hose should not be higher than that of the
drain outlet, or the water tank may not be drained.
To Next Page
Loading...