OPERATING FROM THE REMOTE CONTROL (cont.)
Battery installation
●Slide open the battery compartment cover.
●Insert 2דAAA” batteries as show.
●Slide back the battery cover.
CAUTION
Use 2 LRO 3 AAA (1.5V) batteries . Do not use rechargeable batteries .
Replace the old batteries with new ones of the same type when the display is no longer legible.
Do not dispose batteries as unsorted municipal waste.Collection of such waste separately for special
treatment is necessary.
NOTE:
●If the remote control unit is replaced or disposed of, the batteries must be removed and discarded in
accordance with current legislation as they are harmful to the environment.
●Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
●Do not dispose of batteries in fire. Batteries may explode or leak.
●If the remote control is not be used for a certain length of time, remove the batteries.
NOTE:
●
Point the remote control at the receiver on the appliance.
●
The remote control must be no more than 7 meters away
from the appliance (without obstacles between the remote
control and the receiver).
●
The remote control must be handled with extreme care.
Do not drop it or expose it to direct sunlight or sources of heat.
If the remote control do not work, please try to take out the battery, and put it back.