Need help?Do you have a question about the Arista DCS-7050SX-64 and is the answer not in the manual?
Defines the scope of the guide for installing Arista Networks Data Center Switches.
Outlines the three main steps required to install and use the switch.
Provides information on Class 1 laser products and general safety warnings.
Criteria for choosing a suitable site for switch installation, focusing on temperature and ventilation.
Guidelines to prevent ESD damage during switch installation and servicing.
Instructions for mounting the switch in a two-post equipment rack.
Instructions for mounting the switch in a four-post equipment rack using slide rails.
Instructions for properly grounding the switch after rack mounting.
Guidelines for connecting AC and DC power cables to the switch.
Steps to connect power and console, cancel ZTP, and reboot the switch.
Setting admin password, management IP address, and default route.
To Next Page
General