Need help?Do you have a question about the Arista DCS-7050SX3-48C8 and is the answer not in the manual?
Lists the main tasks required for switch installation and initial use.
Points to external Arista Networks documents for safety and translated warnings.
Provides guidelines to avoid Electrostatic Discharge (ESD) damage during installation or servicing.
Details the process for mounting the switch into a two-post rack.
Details the process for mounting the switch into a four-post rack.
Explains how to connect the switch to the data center ground.
Discusses the correct procedures for connecting power cables to the switch.
Explains the procedures for connecting DC power supplies to the switch.
Detailed steps for manually configuring the switch, including ZTP cancellation and initial setup.
Step-by-step instructions for safely removing a power supply unit.
Step-by-step instructions for safely installing a new power supply unit.
Step-by-step instructions for safely removing a fan module.
Step-by-step instructions for safely installing a new fan module.
General| Model | DCS-7050SX3-48C8 |
|---|---|
| Product Series | 7050X3 |
| System Memory | 16 GB |
| Flash Storage | 16 GB |
| Power Supply | Dual, Hot-swappable |
| Type | Switch |
| Ports | 48 x 10/25G SFP28, 8 x 100G QSFP28 |
| Latency | <1µs |
| MAC Address Table Size | 288, 000 entries |
| Input Voltage | 100-240V AC |
| Fans | Hot-swappable |
| Operating Temperature | 0 to 40 °C |
| Operating Humidity | 5% to 95% non-condensing |
| Dimensions (W x D x H) | 4.4 x 43.8 x 40.6 cm (1.73 x 17.24 x 16 inches) |
To Next Page