Ariston AW 129 NA - Main Motor

REPAIR MANUAL
Page: 9
9. MAIN MOTOR
• To remove the Main Motor, first remove the Drive Belt and then the wiring connection. Now remove the two 13mm motor mounting
bolts, each bolt also has a washer and lock washer (Fig. 9-1).
TECH NOTE: The male wire connection of the motor has an open terminal. Make sure when installing the wire connector that it lines
up as shown with the top terminal left open (Fig. 9-2).
Fig. 9-3
Fig. 9-1
Fig. 9-2
TECH
NOTE
AW 129 NA / AW 149 NA