REPAIR MANUAL
4. CONTROL PANEL REMOVAL
• To remove the Control Panel, first remove the two Phillips screws located on the top left and right corners (Fig. 4-1).
Fig. 3-1
Page: 5
Fig. 4-1
• Next, remove the Soap Dispenser Drawer and
then remove the two Phillips screws located
behind the Soap Dispenser Drawer. (Fig. 4-2).
• From the inside rear of the Control Panel, release
the two Control Panel Mounting Tabs (Fig. 4-3),
disconnect the wire harness and the Control
Panel can be lifted off as a complete assembly.
Fig. 4-2
Fig. 4-3
AW 129 NA / AW 149 NA
To Next Page
Loading...
