14 / EN
A
B
C
4. CUBE S NET INSTALLATION
The device detects the room temperature, therefore several factors should be taken into ac-
count when choosing an installation site. Position the device far from heat sources (radiators,
sunlight, fireplaces, etc.) and from draughts, doorways and windows which could aect the
temperature readings. It should be installed approximately 1.5 metres above the floor level.
WARNING!
Installation should be performed by a qualified technician.
Before making any connections, shut o electrical power to
the boiler with its external two-position switch.
Install the product in a room with a normal level of pollution.
- Secure the CUBE S NET base plate (A) to the wall and
connect the pair of wires to the terminal clamp to hook the
boiler up via the BUS.
- Fit the battery in its compartment (B).
- Restore CUBE S NET on its base plate (C) by pushing it
carefully downwards.
Installing CUBE S NET and activating the Ariston Net services is quick and easy:
it takes just 3 steps!
CUBE S NET
INSTALLATION
ACCOUNT
REGISTRATION
ONLINE PRODUCT
REGISTRATION
The term “Teleassistance” (TD) means the Technical Assistance Centre service, which pro-
vides all remote support functions. The term “Telecontrol” (TC) means the end user service
for monitoring and configuring the Ariston appliance with a smartphone app or web portal.
To Next Page
Loading...
Need help?
General
