Ariston CUBE S NET - Account Registration for Ariston Net; Connecting to Internet and Product Registration; Wi-Fi Network Configuration

EN / 15
5. ACCOUNT REGISTRATION
1. After you have installed the product, switch
on the heating system. CUBE S NET turns on
and the display reads “Select language”; fol-
low the guided basic configuration procedure
until you are prompted to configure the Wi-Fi
network.
2. If you have not configured the Wi-Fi connec-
tion during the first startup, go to the “Connec-
tivity” menu, select “Wi-Fi ON/OFF” and then
select “ON”. The connectivity menu will dis-
play the new menu option “network configu-
ration”; select this and follow the instructions.
• Before starting the Wi-Fi configuration proce
-
dure, check that Ariston Net service is avail-
able in your country and that your internet
connection is on-line.
• Download the Ariston Net app from the
Stores.
Open the app and register your account by
entering the requested information.
• Click on the link in the welcome email to acti-
vate the new account.
WARNING! Ariston Net supports the following
Wi-Fi security protocols: WEP, WPA/WPA2 Personal
6. CONNECTING TO THE INTERNET AND REGISTER-
ING THE PRODUCT
Connectivity
Press to confirm
Wi-Fi ON/OFF
Connectivity information
Reconfiguration
Wi-Fi signal level
Internet time