EN / 17
The product is properly connected to internet and registered if:
• the display indicates a successful connection to the router and internet
• the display shows the basic screen with the “ ” icon steady.
WARNING:
After confirming the procedure, your device (smartphone, PC, tablet ...) will automatically
disconnect from the Remote GW Thermo network; an error page may appear in the browser
window that can be ignored.
6.3 Configuration unsuccessful or requiring update
If the configuration is not successful, CUBE S NET will display the “ ” icon. Repeat the pro-
cedures described previously.
The network configuration must be repeated every time you make a change to the internet
network in your home (change to password, operator, router).
6.4 Time scheduling and time display
When Cube S Net is combined with a boiler which does not have its own internal clock, it must
be connected to internet to show the current time and configure time scheduling with the Aris-
ton Net app.
If no internet connection is available, the time and time scheduling will not be available.
LEGEND:
“AP” Access Point open
“
” No connection to the service or thermostat not configured correctly
“
” Thermostat connected to the router or internet but not to the Cloud
“
” Thermostat configured correctly and connected to the internet and Cloud
“
” Software update in progress
To Next Page
Loading...
