GB / 19
The main page of the system interface can be customised.
From the main page it is possible to check the time, date, opera-
ting mode, set or detected temperatures, hourly time schedule,
the active energy sources and reduction of CO
2
emissions (whe-
re present).
Press OK to access the display settings.
Turn the knob and select:
- Complete menu
Press the OK button.
Turn the knob and select:
- Screen settings
Press the OK button.
The “Screen settings” menu can be used to select the following
parameters:
- Language
Press the OK button.
Turn the knob and select the desired language.
Press OK to confi rm the choice, and press the back button “
“
to return to the previous screen.
Turn the knob and select:
- Time & Date
Press the OK button.
Use the knob to select the date, press the OK button, turn the
knob to select the exact day, press the OK button to confi rm
and move on to the month, followed by the year, pressing the
OK button to confi rm after each step.
Turn the knob to select the time, press the OK button, turn the
knob to select the exact hour, press the OK button to confi rm
and move on to the minute value.
Press the OK button to confi rm.
Turn the knob and select summer time, press the OK button,
select auto or manual, press the OK button.
Press OK to confi rm the choice, and press the back button “
“
to return to the previous screen.
Turn the knob and select:
- Home screen
When setting the main page it is possible to choose the infor-
mation visualised.
By choosing the “Customizable” view mode, it is possible to
select all the desired information. Alternatively, it is possible to
choose from one of the following pre-confi gured view mo
des:
Base
Active sources
CO2 saving (where present)
Customizable
HP system (where present)
Press OK to confi rm the selection. Press the back button “
“to
return to the previous visualisation.
Turn the knob and select:
- Brightness in standby
use the knob to adjust the brightness of the display during
standby periods.
Press the OK button to confi rm.
Turn the knob and select:
- Backlight
use the knob to set the time for which the display backlight
remains on after the last time the system interface was used
and has remained inactive for a certain period of time.
Press the OK button to confi rm.
Turn the knob and select:
- Home screen timing
use the knob to select the time period for which the main
screen is displayed.
Press the OK button to confi rm.
Press the back button “
“ to return to the previous screen.
Basic screen
Setting the date and time
To Next Page
Loading...
Need help?
General
