2 1X-X3 Operation Manual
state Description
The control panel cannot be reset during the extinguishing
activation stage and the reset button may be disabled for up to
30 minutes.
The
extinguishing agent is released into the extinguishing area.
The site optical warning signs or panels are activated.
Normally, your system installer will have configured the
extinguishing sounders to change to a continuous tone.
The extinguishing process cannot be stopped once it has
started and extinguishing will continue until the extinguishing
agent containers are empty.
An alarm in a zone not linked to the extinguishing area or
triggers a fire alarm.
In this state, fire sounders and other system features or
devices are activated after any configured delay. No
extinguishing alarms or devices are activated.
To Next Page
Loading...
Need help?
General
